Flow control and component testing
The Unimotive range of units are designed specifically to be operated using water/glycol (50/50 mix) as a heat transfer fluid
Read moreOur case studies demonstrate the thermodynamic properties of Huber machines on the basis of practical examples.
The Unimotive range of units are designed specifically to be operated using water/glycol (50/50 mix) as a heat transfer fluid
Read moreThe Piccolo is a Peltier based chiller/heater designed for simple bench-top applications. This case study demonstrates the Piccolo’s ability to
Read moreThe Unistat Grand Fleur, with cooling power of 600 watts from 200°C down to 0°C and 350 watts at -20°C, coupled
Read moreThe best unit to control any reactor cannot be accurately determined through a calculation (but a calculation is a good
Read moreHuber’s Unistat “Petite Fleur” is a little flower with an impressive ability to control the process temperature of reactors much
Read moreSay what you do, do what you say. Huber’s case studies take the guess work away from choosing the best
Read moreRunning “Open Bath” units at high temperatures means that oil vapours pollute the air, condense onto the lab surfaces and
Read moreThe Unistat “Chili” measures just 240mm x 427mm x 393mm and is fitted with a 3kW heater. A fully sealed
Read moreThe “Chili” is a miniature, heating only Unistat with a working temperature range of 65°C up to 300°C. It’s small
Read moreThe Unistat 510w is an adaptable laboratory work-horse that can take on a wide range of applications. This is a
Read moreAdding to our rapidly growing library of Case Studies, we connected a Unistat 912w to a Chemglass 100-liter reactor, itself
Read moreThis case study demonstrates the control stability of a Ministat 125 at two different temperatures. Connected to a Chemglass 1-litre
Read moreThe Unistat 912w is one of the smaller floor standing -90°C Unistats. Here we have it connected to an 80-litre
Read moreIn this Case Study we demonstrate once again the efficiency of power transfer of the Unistat range, in this case,
Read moreThe Unistat 430 is a floor standing hydraulically sealed circulator with a temperature range of -40°C up to 250°C. In
Read moreThis Case Study demonstrates the efficiency and abilities of a Unistat “Petite Fleur” in controlling the process temperature inside
Read moreThe Unistat 825 with a temperature range of -85°C up to 250°C is a versatile laboratory based temperature control
Read moreThe Unistat 705 is the Baby in the Huber family of low-temperature Unistats. With a temperature range of -75°C to
Read moreA Ministat 240 was connected to a 20-litre jacketed reactor, itself filled with 15-litres of “DW-Therm” to determine the lowest
Read moreThe “KISS-K6” is the simplest refrigerated circulator in the Huber range. The basic, easy to use “KISS” controller head features
Read moreThe “KISS K6” is our most simple and economic refrigerated circulator. The picture shows it connected to a 1-litre Glass
Read moreThe best Huber unit for an application depends entirely on what the application needs in terms of temperature control. Today
Read moreWithin our Production halls, we have a raised platform dedicated to practical training for our partners, staff and distributors and
Read moreDuring this period of travel restrictions, we have used the time and resources to increase our library of Case Studies.
Read moreIn everyday life, hydrocarbon gases are in common use domestically. Gas fired central heating, water heaters and cooking stoves are
Read more